The Multiplex EasyStar is an electric RC trainer plane, designed for beginning pilots. It offers incredibly stable flight characteristics and durability. The Easy Star RC airplane is powered by a powerful Permax Speed 400 motor mounted on the top, so hard landings won't break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from Multiplex's durable ELAPOR Foam, the EasyStar will take a tremendous amount of abuse without breaking. When it does break it's easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane for teaching someone to fly, when other trainers would be ready for the trash can! 

 

If you like to build your own models, this Easy Star Kit is the one for you! If you don't, the EasyStar also comes as Ready-to-Fly (RTF). Click here to check out the RTF Easy Star RC airplane.

Quick to Build - Easy to Fly:

• No painting required, prefabricated and colorful parts made of shockproof ELAPOR foam
• Protected motor mounted above the wings for safety and durability
• Designed for beginners learning to fly
• Easy to dismantle for easy transport
• Flown with elevator/rudder and motor control
• Good gliding properties, even when motor is turned off
• Flies well with a 6 or 7 cell battery pack
• Airfoil: Flat bottom, high wing
• Center of Gravity: 3.07" back from the wing's leading edge at the fuselage sides
• Control Throws- Elevator: Up & Down 3/16" Rudder: Right & Left 3/8"

FEATURES:

• Construction:   Elapor foam on the fuselage, wing & tail section
• Wings: two-piece, foam construction
• Radio compartment: Foam
  
• Landing Gear: no landing gear, model lands on its belly
• Hardware: Push rods & other hardware included
• Motor Mount: molded into the foam fuselage
• 400 size Permax motor with high current socket and lead (must be soldered to motor)
• 5" diameter pusher prop with black spinner (prop faces the rear of the airplane)
• Colorful Easy Star logo decals (must be cut out and applied)
• Hardware package
  
• Ready to fly in two to six hours
  

Model Specifications:

Wing Length:	54 inches
Wing area:	372 sq. inches
Wing Loading:	10.76 oz. / sq. ft.
Fuselage Length:	34 in.
Weight:	24 oz.
Flight Characteristics:	Trainer

REQUIRES: 

• 3-channel radio (throttle, rudder, and elevator control) with 2 micro servos, 12 amp speed control
• 6 or 7 cell battery from 500 to 1500 mAh with the proper connector
  
• Charger for the battery with proper connector
• Miscellaneous building equipment

Here's a cool video of the RTF Easy Star

We carry the full line of Multiplex replacement parts for the Easy Star.

Get your Multiplex Easy Star remote control plane Kit and all your RC flight needs at

RC Planes and Copters, your online Radio Control FUN Store!

Home Page        RC Planes Jets         RC Radio Receivers Servos   RC Batteries Chargers